In-Circuit Functional Testers - QT-8200

In-Circuit Functional Testers - QT-8200 QT8200 comes with large device library written in QDDL / VHDL and PythonTD languages for In-Circu.. QMAX Product #: QT-8200 based on 0 Reviews 2 - 3 Days

In-Circuit Functional Testers - QT-8200

Brand: QMAX
Product Code: QT-8200
Call for Price: +202 333 84 831

QT8200 comes with large device library written in QDDL / VHDL and PythonTD languages for In-Circuit and out of Circuit Testing of devices. While testing devices in-circuit, QT8200 employs the auto-compensation technique.
When any of the inputs are linked together or connected to the power pins, the drive pattern or Test Vector is modified on the fly depending upon the In-Circuit links of the device under test.
The Qmax simulator simulates the output response on the new modified test vector. This is essential to avoid any clash between the pin drivers driving these pins with different logic levels at the same time.
QT8200 can test any Digital device in in-circuit for its functionality using library defined test patterns. The ICFT mode allows interactive testing of the individual devices, as well as whole board, comprising various devices. Clock Terminator test avoids False Alarm and ensures highest possible fault coverage on a wide range of boards.
QT8200 offers powerful Automatic Guarding Guide, while testing a BUS device such as Tri-state / bidirectional/ O.C. / O.E. device, it is required to guard the device under test by disabling other BUS devices present in the BUT which are on the same BUS.
QT8200 has auto guarding facility which lists the IC and the pins of those devices which may need to be guarded.
Trace Links Wizard makes auto guard list correction much simpler. QT8200 can perform an in-circuit clip-on test for analog devices. Using its three built-in true analog channels, QT8200drives true analog patterns to the input pins and senses the analog voltage at the output pinto give a clear Pass/Fail message. User needs to only clip-on & type in the part number of the device to be tested.
QT8200 has a powerful evaluation engine to test linear devices in-circuit, without the need to learn from a known good board.
QT8200 also offers QSM VI technique to test custom devices passive components on a board which cannot be functionally tested in the ICFT mode. QSM VI takes traces by driving a user defined current limited sine wave between any two nodes of the DUT and plotting the voltage Vs current trace.
Auto “Best Fit Curve” for QSM VI automatic selection of best source impedance, voltage and frequency of the VI stimulus.
RLCV measurements.
Frequency measurement up to 130 MHz.
3 channel Digital Oscilloscope and Function Generator.
Powerful “Board under Test” Power Supplies for testing large ECL boards often requiring 20A and more current.

There is no specification for this product.
There are no reviews for this product.
Write a review
  • In-Circuit Functional testing of digital, analog and mixed Signal Mixed Logic devices of various logic families within +/-12V.
  • User programmable Actual test speed on the pin of DUT and it is up to 8 MHz (125 nano seconds).
  • High current rating and five voltage output options for the BUT with latest SMPS module (450 watts).
  • Qmax Fault Simulation Validated Vast Device Library of 33,200+ western ICs with optional Russian library of 1500+ ICs.
  • Windows-based Visual Work Station OR TestDirector 6 software Auto guarding guide using trace links wizard.
  • QSM VI - a unique analytical tool to troubleshoot faults on Hybrids / Custom ICs as well as ESD damaged devices.
  • Powerful IDDE software to further expand the device library Optional : Fault Simulation Module.
  • RLCV measurements.
  • Frequency measurement up to 130 MHz.
  • 3 channel Digital Oscilloscope and Function Generator.
  • Clock Terminator test avoids False Alarm and ensures highest possible fault coverage on a wide range of boards.
  • In built Simulator for In-Circuit compensation.
  • Dual trace facility for probes and clips.
  • Auto Guarding Guide for Bus based devices and OC / OE Devices.
  • Logic analyzer waveform display for failure confirmation.
  • Identify Unkown and House Coded devices including LSI devices.
  • Graphical test program generator for Digital, Analog, Mixed signal devices.
  • Mixed logic testing through dual palettes.
  • Built in self-diagnostic facility for maintenance.
  • Auto / Manual channel mapping facility for board functional test through card edge/fixtures.
  • Modular system design for future up-gradation.
  • Powerful Sequencer based hardware architecture
  • Automatic internal pull-up/down for open collector and open emitter devices.
  • Board Learn/Compare mode results in increased board recovery rate.
  • Circuit Tracer for schematic generation / reverse engg. applications (Optional).
  • IDDE software for easy Device Test Program Generation (Optional) with Fault coverage report.
  • Military part code library.

CircuitTracer (Optional)This optional software package helps the user to trace the intra links between the pins of an IC and also the interlinks between pins of various ICs which can be accessed through appropriate test clips. It automatically generates the Netlists. The Netlist file is then converted to file formats, which are compatible to CAD software packages like ORCAD or EDWIN. This process helps in Reverse Engineering of the PCB i.e. to generate the Schematic Diagram / Circuit Diagram of the Board Under Test.
IDDE is an Optional Software Package which is extremely useful for Device Test Program Generation. IDDE stands for Integrated Device Development Environment using VHDL and PythonTD test languages. Complete with automatic fault simulation nad fault coverage report for every library digital device developed. Also included is GTPG whereuser can directly define the required test input waveforms for the Device Under Test or the entire Board Under Test graphically and if the expected Output waveforms are known to the user the same also can be defined. Otherwise the output from Known Good Board can be learnt and stored as master reference for future comparisons. This mode is extremely useful to test devices / simple boards without any need to write complex test programs.Russian Libray / Military Part Code Library.

  • Go / No Go Functional Test using edge connectors / bed of nails / clips and probes.
  • Small to medium volume production test of devices / Hybrids and PCBs.
  • Very general purpose PCB test and diagnostic system with extended features that include all logic families (including ECL), Analog and Mixed signal devices useful for In-House Maintenance and Third party repair of PCBs.
  • Custom Test applications such as relay test / hybrid test and device tests.
  • PCB Diagnostics and Repair using In-Circuit Functional Test of High speed Devices, Microprocessors and Controllers.
  • Inward Goods Inspection (IGI) for Digital / Analog / Mixed Signal ICs Complete Repair Station for Third party Maintenance.
  • Production test of Flex Cable Assemblies for Hard Disk / Displays / Cameras.
  • In-house maintenance wings of PSUs.
  • Electronic manufacturing units for Board recovery and Production line testing.
  • Industries in Automobile, Textiles, Engineering, Steel, Cement sectors for CNC, PLC, electronic PCBs troubleshooting.
  • Hi-tech atomic / space labs and R & D labs for maintenance of sophisticated instrumentation / equipment.
  • Hospitals for in-house maintenance of Biomedical equipment Electricity generating authorities for maintenance of Control and Instrumentation.
  • TPM companies Central Maintenance Centre of Universities, technical educational institutions, Engineering Colleges and Polytechnics.
  • Private / Public Sector Units executing Defence Projects.
  • Ruggedized version of QT8200 is QT8200M for military applications with camouflage paints.

porn Porn