Compact & Rugged Design Ensures and Broadens Integration Possibility into Various Process Monitoring Systems
Small but sturdy packaging with solid aluminum body, standard tripod mount and screw holes for flexible installation
Item | S30W | S30H | |
---|---|---|---|
Detector | Uncooled Focal Plane Array (Microbolometer) | ||
Resolution | 160 x 120 | ||
Measuring Range | -20°C to +350°C | 0°C to +600°C | |
Spectral Range | 8~13μm | ||
Thermal Sensitivity (NETD) | <0.2°C at 30°C | <0.5°C at 30°C | |
Accuracy | ±2°C or ±2% of Reading (whichever is greater) | ||
Field of View | 28°(H) x21°(V) Accuracy:±10% | ||
IFOV | 3.1mrad (Horizontal) | ||
Focal Distance | 50cm to Infinity | ||
Frame Rate | 8.5 Frames/second | ||
Operating Temperature / Humidity | 0°C to +50°C , at <90%RH (non-condensing) | ||
Power Supply | DC12V± 1V | ||
Power Supply | 3.0W (typical) at 35°C in RUN Mode | ||
Dust / Splash Proof | Protection Code: IP67 Equivalent | ||
Interface | |||
Ethernet | RJ-45 | ||
Contact/Power | Dedicated 8 pin Round Connector Tajimi R04-R8M | ||
Video | BNC | ||
Standard Accessories | Remote Control Software, InfRec Analyzer Lite, Power Connector, Operation manual |
Quick Start Kit * |
S30-351 (220V) S30-352 (110V) |
Interconnecting cable to AC adaptor with alarm output leads, AC Adaptor (DC V12, compatible), Ethernet Cable with dust / splash proof over at one end |
---|
Item | S30W | S30H | |
---|---|---|---|
Measuring Functions | RUN / FREEZE | ||
Temperature Span | -20°C to +350°C | 0°C to +600°C | |
Focus | Manual | ||
Emissivity | 0.10 to 1.00 (0.01 Step) | ||
Display Functions | Color Gradation | 256 Tones | |
Color Palette | Rainbow (shine), lris (Fine), Brightness, Monochrome | ||
Specific Point | Five (5) Points (including One Fixed Center Point) | ||
Alarm | One (1) Point (outputs contact signal when the temperature exceeds the alarm set condition) | ||
Data Display | Color Bar, Scale (upper and lower limit value), Cursor, Date and Time, Emissivity, Temperature unit (°C/°F)Status Icon | ||
Communication Protocol | TCP/IP | ||
Video Output | NTSC / PAL (Selectable) | ||
Storage of Setup | Stores one (1) user setup | ||
Image Improvement | Averaging | Σ OFF, Σ2, Σ16 | |
Contact Output | One (1) Point (non-voltage A contact related with alarm) |
Item | Specification |
---|---|
Sensor | CMOS Sensor |
Effective Pixels | Approx. 1.3M Pixels (1280x1024) |
Focal Distance | 50cm to Infinity, Focus Free |
Exposure | Auto-Exposure |
Ethernet interface enables remotely-controlled monitoring and real-time thermal image transfer and recording by PC (pier to pier or over the network). Graphics such as point temperature are displayed on image coming from analogue video output, which helps setup process.
Once various parameters have been set using the Remote Control Software, the camera can be disconnected from the PC to operate as a Stand-Alone Monitoring Unit.
Temperature Alarm can be programmed and kept operated to give out alarm signal (1 condition: threshold below/ above, box / entire FOV, number of pixel and frame etc.). Real-time Image is monitored with user's preprogrammed graphics (point temp) via analogue video output.
Software Development Kit (SDK)*1 allows users to design their own system to operate maximum of 15*2cameras in parallel.